Santa Fe V6-3.5L (2004)
items about that cylinder.
-
Injector and harness Ignition plug and high tension cable
-
Compression pressure
4. If the injection system is OK but the injector drive time is out of specification, check for the following items.
-
Poor combustion in the cylinder (faulty ignition plug, ignition coil, compression pressure, etc.)
-
Loose EGR valve seating
FUEL INJECTOR
INSPECTION
1. Measure the resistance of the injectors between the terminals using an ohmmeter.
Resistance :13 - 16 Ohm [at 20 °C (68 °F)]
2. It the resistance is not within specification, replace the injector.