Santa Fe V6-3.5L (2004)
1. Install the fuel vapor hose and return hoses.
-
If the fuel line has a stepped section, connect the fuel hose to the line securely, as shown in the illustration.
-
If the fuel line does not have a stepped section, connect the fuel hose to the line securely.
2. Install the fuel filter and tighten the fuel filter bracket.
3. Tighten the two fitting nuts while holding the fuel filter nuts.
Tightening torque:
Fuel filter fitting nuts: 20 - 40 Nm (300 - 400 kg.cm, 22.1 - 29.5 lb-ft)
4. Install the clips and make sure that they do not interfere with other components.
