Santa Fe V6-3.5L (2004)
Ignition Coil: Testing and Inspection
INSPECT IGNITION COIL
1. Measurement of the primary coil resistance Connect the negative (-) terminal of a 3 V power supply to terminal 2 of the power transistor; then
check whether there is continuity between terminal 3 and terminal 2 when terminal 1 and the positive (+) terminal are connected and disconnected.
Replace the power transistor if there is malfunction.
1. Measurement of the secondary coil resistance Measure the resistance between the high-voltage terminals of the ignition coil.
Standard value:
20 ± 15% (K Ohm) - 2.4 DOHC
13.0 ± 15% (K Ohm) - 3.5 V6