Santa Fe V6-3.5L (2004)
3.
Plug the GDS 3-connector adaptor's larger 10-pin connector to the vehicle's connector under the instrument panel on the driver's side located as
shown in the picture above.
4.
Turn on the VCI and GDS laptop, and then perform reprogramming in accordance with the instructions below:
AUTOMATIC REPROGRAMMING PROCEDURE:
Internet Update:
1.
Select the Internet Update to check that the GDS has Local Version 1.21 or higher. It must have 1.21 or higher to contain the SM reprogram data.
This particular screen example shows the Local Version is the same as the Server Version so it already has 1.21 as the latest version.