hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

A/T Controls - MIL ON/Failsafe Mode/Multiple DTC's Set|Page 5614 > < A/T Controls - MIL ON/Failsafe Mode/Multiple DTC's Set|Page 5612
Page 7
background image

4.

Check the harness inside the transaxle oil pan for a short circuit to ground. Replace the harness if damage is found or if three or more solenoid
DTCs are found in Step 1. (Refer to TSB # 04-40-015 for instructions).

5.

Refer to the DTC recorded in Step 1 and follow the repair procedure shown.

SOLENOID REPLACEMENT:

6.

Remove the battery.

7.

Drain the radiator. Remove the lower radiator hose from the radiator.

8.

Drain the ATF.

9.

Remove the valve body cover from the transaxle.

A/T Controls - MIL ON/Failsafe Mode/Multiple DTC's Set|Page 5614 > < A/T Controls - MIL ON/Failsafe Mode/Multiple DTC's Set|Page 5612