Santa Fe V6-3.5L (2004)
4. Align the marks on the companion flange and flange yoke and the differential companion flange and rubber coupling. Install the propeller shaft.
NOTE: Specified torque:
^
Transfer flange to flange yoke: 50 - 60 Nm (500 - 600 kgf-cm, 37 - 44 ft. lbs.)
^
Differential companion flange to rubber coupling: 100 - 120 Nm (1000 - 1200 kgf-cm, 73 - 88 ft. lbs.)
5. Tighten the center bearing mounting bracket to the specified torque.
Specified torque 40 - 50 Nm (400 - 500 kgf-cm, 29 - 37 ft. lbs.)