Santa Fe AWD V6-2.7L (2007)
Technical Service Bulletin # 08-01-004
Date: 080311
Campaign 082 - Trailer Hitch Module/Wiring Replacement
Group: CAMPAIGN
Number: 08-01-004
Date: MARCH 2008
Model:
SANTA FE/VERACRUZ
Subject:
TRAILER HITCH WIRING HARNESS REPLACEMENT PROCEDURE (CAMPAIGN 082)
IMPORTANT:
DEALERS MUST PERFORM THIS CAMPAIGN ON ALL AFFECTED VEHICLES PRIOR TO CUSTOMER RETAIL DELIVERY.
IMPORTANT:
WHEN A VEHICLE ARRIVES AT THE SERVICE DEPARTMENT, ACCESS HYUNDAI MOTOR AMERICA's "WARRANTY VEHICLE
INFORMATION" SCREEN VIA DCS ON-LINE TO IDENTIFY OPEN CAMPAIGNS.
DESCRIPTION:
This bulletin provides a procedure to replace the tow hitch control module and harness.
VEHICLES AFFECTED:
^
Model: Santa Fe (CM), Veracruz (EN)
^
Affected vehicle range: VIN's equipped with a port-installed or dealer-installed tow hitch and the original tow hitch control module.
NOTE:
Two (2) types of trailer hitch wiring harnesses have been installed on the affected vehicles. The type of wiring harness will determine the proper
service procedure. Look inside the driver's side rear bumper, behind the rear wheel, to determine which procedure is appropriate for each vehicle.
REQUIRED TOOLS:
^
10 mm socket
^
Ratchet handle
^
Wire cutters
^
Heat gun