Santa Fe FWD L4-2.4L (2010)
Power Steering Pump: Removal and Replacement
Components and Components Location
Components
Repair Procedures
Removal
1. Remove the wheel guide (A) and side cover (B).
(3.3L only)
2. Remove the drive belt.
3. Disconnect the oil pressure switch.
4. Disconnect the pressure tube (A) and suction hose (B) from the power steering pump assembly.
Tightening torque :
55 - 65N.m (5.5 - 6.5kgf.m, 40 - 47lb-ft)
