Santa Fe FWD V6-2.7L (2007)
4. Remove the oil level gauge.
5. Remove the heat protector(A).
6. Remove the exhaust manifold assembly(A).
INSTALLATION
1. Install the exhaust manifold assembly with a new gasket.
Tightening torque 29.4-34.3Nm (3.0-3.5kgf.m, 21.7-25.3 lb-ft)
2. Install the heat protector.
Tightening torque 16.7-21.6Nm (1.7-2.2kgf.m, 12.3-15.9 lb-ft)
3. Install the front muffler assembly.
Tightening torque 39.2-58.8Nm (4.0-6.0kgf.m, 28.9-43.4 lb-ft)