Santa Fe FWD V6-2.7L (2007)
Wheel Hub (Locking): All Technical Service Bulletins
Drivetrain - Front Hub Clicking Shifting form 'D' to 'R'
Group: CHASSIS
Number: 07-50-005
Date: APRIL, 2007
Model:
(CM) 2007 SANTA FE
Subject:
INSERTION OF WASHER BETWEEN FRONT HUB AND DRIVESHAFT
DESCRIPTION:
This bulletin provides a procedure to insert a plastic washer between the front hub and the driveshaft (both sides) on some 2007 MY Santa Fe's (CM).
Symptom/Condition:
^
Abnormal noise/clicking heard from the front of the vehicle when shifting from "R" (reverse) to "D" (Drive) range with the brakes applied.
Cause:
^
Slip along the contact surface between the front hub and the driveshaft.
NOTE:
If there is abnormal noise not associated with this bulletin, please do not perform the service procedure of this bulletin. Re-inspect the origin of the
noise and take proper action.
VEHICLES AFFECTED:
^
Model: SANTA FE (CM) - 2007MY - All
SERVICE PROCEDURE:
1.
Lift the vehicle off the ground and remove the front wheels (Both sides).
2.
Remove the cotter pin (B) from the front hub (C) and then remove the driveshaft castle nut (A) and washer (D).