hyundai Workshop Repair Guides

Hyundai Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

PARTS INFORMATION

REPAIR PROCEDURE:

1. Using a GDS, check for DTC in both the "Engine" and "Automatic Transaxle" menus. Record the DTC and description.

2. From the GDS, select:

^ Vehicle

^ "Auto Transaxle" menu

^ "Actuation Test"

^ Press the "Start" button and listen for a solenoid sound and "Success" indication.

^ If the test result is:

^

Fail: go to Step 3

^

Success: the wiring between the PCM/TCM currently has no open or short circuits. Go to Step 4.

Relays and Modules > Relays and Modules - Transmission and Drivetrain > Relays and Modules - A/T > Control Module, A/T > Component Information > Technical Service Bulletins > Customer Interest: > 09-AT-018 > Oct > 09 > A/T - MIL ON/Failsafe Mode/Multiple Solenoid DTC's Set > Page 659

< PREV PAGE NEXT PAGE >