Santa Fe FWD V6-2.7L (2007)
Windshield Moulding / Trim: All Technical Service Bulletins
Body - Windshield Moulding is Loose
Group: BODY (INTERIOR AND EXTERIOR)
Number: 08-BD-001
Date: MARCH, 2008
Model:
2007-2008 SANTA FE
Subject:
WINDSHIELD MOLDING LOOSE
DESCRIPTION:
This bulletin provides a procedure to re-secure the windshield molding by applying urethane between the molding and the windshield.
APPLICABLE TO:
SANTA FE (CM)
TOOLS/PARTS INFORMATION
SERVICE PROCEDURE:
1.
Clean the back of the molding and windshield mounting flange area with a clean cloth.
2.
Apply windshield urethane to the body where the molding was loose. Ideal bead height should contact the back side of the windshield glass, but
not be any higher.
