Santa Fe FWD V6-3.3L (2009)
Hood Latch Release: Service and Repair
Replacements
Hood Release Handle Replacement
1. Fit the 8mm socket (A) into the clip (B) of hood release handle and insert the flat blade screwdriver (D) into the gap between the lower panel and
the hood release handle.
2. Pry off the handle (C) with the clip (B) depressed by using 8mm socket to remove it.
3. Installation is the reverse of removal.
NOTE:
-
Make sure the hood latch cable is connected properly.
-
Make sure the hood locks securely.