Santa Fe FWD V6-3.3L (2009)
6. Pump the brake pedal several times, and then loosen the bleeder screw until fluid starts to run out without bubbles. Then close the bleeder screw.
7. Repeat step 5 until there are no more bubbles in the fluid for each wheel.
8. Tighten the bleeder screw.
Bleed screw tightening torque:
6.86 - 12.74 N.m (0.7 - 1.3 kgf.m, 5.09 - 9.45 lb-ft)