Santa Fe FWD V6-3.3L (2009)
Tightening torque :
200 - 260N.m (20 - 26kgf.m, 145 - 188lb-ft)
3. Loosen the hose eye-bolt (A) and caliper mounting bolts, then remove the rear caliper assembly.
Tightening torque :
Brake hose to caliper:
24.5 - 29.4N.m (2.5 - 3.0kgf.m, 18.1 - 21.7lb-ft)
Caliper assembly to carrier:
78.5 - 98.1N.m (8.0 - 10.0kgf.m, 57.9 - 72.3lb-ft)
4. Remove the rear brake disc by loosening the screws (A).
Installation
1. Installation is the reverse of removal.
2. Use a SST (09581-11000) when installing the brake caliper assembly.
3. After installation, bleed the brake system.
Replacement
Replacement
Rear Brake Pads
1. Loosen the guide rod bolt (A) and pivot the caliper up out of the way.