Santa Fe FWD V6-3.3L (2009)
3. Loosen the hose eye-bolt (A) and caliper mounting bolts, then remove the front caliper assembly (B).
Tightening torque :
Brake hose to caliper:
24.5 - 29.4N.m (2.5 - 3.0kgf.m, 18.1 - 21.7lb-ft)
Caliper assembly to knuckle:
78.5 - 98.1N.m (8.0 - 10.0kgf.m, 57.9 - 72.3lb-ft)
4. Remove the front brake disc by loosening the screws (A).
Installation
1. Installation is the reverse of removal.
2. Use a SST (09581-11000) when installing the brake caliper assembly.
3. After installation, bleed the brake system.
Replacement
Replacement
Front Brake Pads
1. Loosen the guide rod bolt (A) and pivot the caliper (B) up out of the way.