Santa Fe FWD V6-3.3L (2009)
Timing Chain: Service and Repair
Repair Procedures
1 of 2
Removal
CAUTION:
-
Use fender covers to avoid damaging painted surfaces.
-
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
NOTE:
-
Mark all wiring and hoses to avoid misconnection.
-
Turn the crankshaft pulley so that the No.1 piston is at top dead center.
1. Disconnect the battery negative cable (A).
2. Remove the engine cover (A).
3. Remove the intake air hose and air cleaner assembly.
(1) Disconnect the MAF connector (A).
(2) Disconnect the breather hose (B) from air cleaner hose.
(3) Remove the intake air hose(C) and air cleaner body (D).
4. Remove the RH front wheel.
5. Remove the under cover (A).