Santa Fe FWD V6-3.3L (2009)
(4) Connect the brake vacuum hose.
(5) Connect the PCV hose.
(6) Connect the water hoses to the ETC.
(7) Install the ETC bracket.
(8) Connect the RH CMPS connector (A).
(9) Connect the LH CMPS connector (A) and oil pressure switch connector(B).
(10) Install the wiring harness protector (E) and connect the LH ignition coil connector(A), injector connector (B), condenser connector (C) and
ground (D).
(11) Connect the LH front oxygen sensor connector (A).
(12) Connect the OCV connector (A) and knock sensor connector (B).