Santa Fe FWD V6-3.3L (2009)
Tightening torque :
8.8 - 10.8N.m (0.9 - 1.1kgf.m, 6.5 - 7.9lb-ft)
37. Install the under cover (A).
Tightening torque :
8.8 - 10.8N.m (0.9 - 1.1kgf.m, 6.5 - 7.9lb-ft)
38. Install the RH front wheel.
Tightening torque :
88.3 - 107.9N.m (9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)
39. Install the intake air hose and air cleaner assembly.
(1) Install the intake air hose(C) and air cleaner body (D).
(2) Connect the breather hose (B) to the air cleaner hose.
(3) Connect the MAF connector (A).
40. Install the engine cover (A).
41. Connect the battery negative cable (A).
NOTE:
-
Refill engine with engine oil.
-
Refill radiator and reservoir tank with engine coolant.
-
Bleed air from the cooling system.
