Santa Fe FWD V6-3.3L (2009)
Housing Assembly HVAC: Service and Repair
Blower Unit
Components and Components Location
Component Location
Components
Repair Procedures
Replacement
1. Disconnect the negative (-) battery terminal.
2. Remove the crush pad.
3. Disconnect the connectors from the intake actuator, the blower motor and blower resister.
4. Remove the blower unit (A) from the heater unit after loosening a mounting bolt and 3 screws.
NOTE:
Make sure that there is no air leaking out of the blower and duct joints.
5. Installation is the reverse order of removal.