Santa Fe FWD V6-3.3L (2009)
Spark Plug: Testing and Inspection
On-vehicle Inspection
Inspect Spark Plug
1. Remove the ignition coil connector(A).
NOTE:
When removing the ignition coil connector, pull the lock pin(A) and push the clip(B).
2. Remove the ignition coil(B).
3. Using a spark plug socket, remove the spark plug.
CAUTION:
Be careful that no contaminates enter through the spark plug holes.
4. Inspect the electrodes (A) and ceramic insulator (B).
Inspection Of Electrodes
5. Check the electrode gap (A).
Standard : 1.0 - 1.1 mm (0.0394 - 0.0433 in.)
