Santa Fe FWD V6-3.3L (2009)
Side Air Bag: Service and Repair
Curtain Airbag (CAB) Module
Components and Components Location
Components
Repair Procedures
Removal
1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
2. Remove the following parts.
A. Side trim, Roof trim
3. Disconnect the Curtain Airbag harness connector.
4. After loosening the mounting bolts(10EA) remove the curtain airbag.
Installation
1. Remove the ignition key from the vehicle.
2. Disconnect the battery negative cable and wait for at least three minutes.
3. Install a Curtain Airbag (CAB) on the mounting bracket.
4. Tighten the CAB mounting bolts (10EA).