Santa Fe FWD V6-3.3L (2009)
13. Remove the rear stabilizer bar.
Installation
1. Install the bushing (B) on the stabilizer bar (A).
NOTE:
Bring clamp (C) of stabilizer bar (A) into contact with bushing (B).
2. Install the bracket (D) on the bushing (B).
3. Install the rear stabilizer bar to the rear cross member.
4. Install the rear stabilizer bar bracket (B) and link (A).
Tightening torque :
Nut(C) : 44.1 - 53.9N.m (4.5 - 5.5kgf.m, 32.5 - 39.8lb-ft)
Nut(D) : 58.8 - 78.5N.m (6.0 - 8.0kgf.m, 43.4 - 57.9lb-ft)
5. Install the rear cross member.
6. Support the rear cross member assembly (A) with the jack.
7. Install the rear cross member mounting bolts (A), nuts (B) and plate (C).
Tightening torque :
Bolts(A) : 156.9 - 176.5N.m (16 - 18kgf.m, 115.7 - 130.2lb-ft)
Nuts(B) : 156.9 - 176.5N.m (16 - 18kgf.m, 115.7 - 130.2lb-ft)