Santa Fe GLS V6-2.7L (2002)
Ignition Coil: Testing and Inspection
IGNITION COIL
1. Measurement of the primary coil resistance
Measure the resistance between connector terminals 1 and 2 (the coils at the No. 3 and No. 6 cylinder sides) of the ignition coil, and between
terminals 2 and 4 (the coils at the No. 1 and No. 4 cylinder sides), and between terminals 2 and 3 (the coils at the No. 2 and No. 5 cylinder sides).
Standard value: 0.74 ± 10% (ohm)
2. Measurement of the secondary coil resistance
Measure the resistance between the high-voltage terminal for the No. 3 and No. 6 cylinders, between the high-voltage terminals for the No. 1 and
No. 4 cylinders and between the high-voltage terminals for the No. 2 and No. 5 cylinders.
Standard value : 13.3 ± 15% (Kohm)
CAUTION: When measuring the resistance of the secondary coil, be sure to disconnect the connector of the ignition coil.