Santa Fe GLS V6-2.7L (2002)
Clutch Pedal Assembly: Service and Repair
CLUTCH PEDAL
DISASSEMBLY
1. Disassemble the cotter pin, washer, and clevis pin.
2. Remove the clutch pedal mounting bolt.
INSPECTION
1. Check the pedal shaft and bushing for wear.
2. Check the clutch pedal for bending or torsion.
3. Check the return spring for damage or deterioration.
4. Check the pedal pad for damage or wear.
IGNITION LOCK SWITCH INSPECTION
Remove the ignition lock switch and check for continuity between the terminals. If the continuity is not as specified, replace the switch.
REASSEMBLY