hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Cruise Control Servo Cable > < Door Opening - Weatherstrip Installation Procedure|Page 8079
Page 1
background image

Cruise Control Servo: Testing and Inspection

Fig. 11  Testing Actuator

1.

Disconnect the connector, Fig. 11.

2.

Using an ohmmeter, measure resistance of clutch coil.

3.

If resistance in not approximately 55 ohms between terminals 1 and 2, replace actuator.

Cruise Control Servo Cable > < Door Opening - Weatherstrip Installation Procedure|Page 8079