Scoupe L4-1468cc 1.5L SOHC (8 VALVE) (1991)
M/T.................1-2 mm (0.04-0.08 in.)
A/T..............3-5 mm (0.12-0.20 in.)
17. Connect the ISC motor connector.
18. Disconnect the voltmeter, and connect the TPS connector.
19. Start the engine and check to be sure that the idle speed is correct.
20. Turn OFF the ignition switch and disconnect the battery terminal for 15 seconds and then reconnect. (This erases the data stored in ECU memory
during the ISC adjustment).