Scoupe L4-1468cc 1.5L SOHC (8 VALVE) (1991)
4.
Inspect each distorted female pin, reshape by inserting a small flat screwdriver between the pins and bending them gently by rocking the
screwdriver side to side. (Figure 3).
5.
Bend each male pin gently away from the plastic separator with a small flat screwdriver.
6.
Verify the continuity of # 3 and # 4 pulse generator wires from the "T01" connector female side to the # 5 and # 12 pins on TCU "T10-2" (Figure
4).
7.
Reconnect male and female connectors at "T01" and "T10-2".
8.
Erase any previously stored transmission codes.
9.
Road test the vehicle.
WARRANTY INFORMATION
MODEL
OPERATION
0P.
CAUSAL
NATURE
CAUSE
MODEL
YEAR
CODE
OPERATION
TIME
PART
CODE
CODE
NUMBER
Scoupe
1991/
45643R0F
Pulse Generator
0.4
17993-
C15
N26
1992
Connector Pin Repair
13000