Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
2)
Turn on the A/C switch
3)
Check whether there is a change in voltage between pins 1 and 2 corresponding to the temperature changes of the evaporator.
NOTE:
This test should be carried out with the connector coupled.
4)
If the condition is not satisfied, replace the thermistor.
PARTS INFORMATION
NOTE:
The 1994 A/C kit applications for the Elantra and Scoupe are as follows:
ELANTRA
Production Date
A/C Kit P/N
07/01/93 - 10/10/93
97600 - 28BO0
10/11/93 - Current
97600 - 28B01
P/N 97600-28 BOO can be used in place of 97600-28B01 by using extension wire 00228-14100. P/N 97600-28B01 CANNOT be used in place of
97600-28 B00 (vehicles produced before 10/11/93).
SCOUPE
Production Date
A/C kit P/N
07/01/93 - 10/31/93
97600 - 23B00
11/01/93 - Current
97600 - 23B01