Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
1O. Disconnect the fuel injector harness connector.
11. Remove the delivery pipe with the fuel injectors and pressure regulator attached.
CAUTION: Be careful not to drop the injectors when removing the delivery pipe.
12. Remove the insulator from the intake manifold and disconnect the heater hose.
13. Remove the intake manifold.
INSPECTION
Surge Tank
-
Check the surge tank for defects or cracks. Replace if necessary.
Intake Manifold
-
Check for damage or cracking of any part.
INSTALLATION
1. Install the delivery pipe with the fuel injectors and pressure regulator attached.
CAUTION: Be careful not to drop the injectors when installing the delivery pipe.
2. Ensure that insulators are correctly inserted into the delivery pipe hole.
3. Continue assembly in reverse order of disassembly.