Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
![background image](/hyundai/scoupe/l4-1468cc_1.5l_sohc_vin_j_mfi/Page-1311002.png)
Harness Inspection Procedure
Sensor Inspection Procedure
1. Disconnect the knock sensor connector.
2. Measure resistance between the terminal 2 and 3.
Standard value: about 5 M ohms at 20° C (68° F)
3. If the resistance is continual, replace the knock sensor.
Tightening torque: 16 - 25 Nm (11.8 - 18.4 ft lb)