Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
Fig. 5 Exploded View Of Manual Steering Gear
4. Remove yoke plug locknut, Fig. 5; then, using tool No. 09565-21100, or equivalent, remove yoke plug.
5. Remove yoke spring, cushion rubber and support yoke from gearbox.
6. Remove and discard oil seal.
7. Remove snap ring, then the pinion and bearing assembly.
8. Remove pinion bearing retainer snap ring; then, using tool No. 09565-21000, or equivalent, and a suitable press, press bearing from pinion.
9. Cut bellows band, then remove bellows from right tie rod.
10. Unstake right tie rod end nut, then move rack fully toward housing. Carefully position toothed portion of rack in a suitable vise and remove tie rod.