Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
Clutch Disc: Service and Repair
REMOVAL
1. Remove the transaxle.
2. Insert the special tool (09411-11000) at the center spline (in order to prevent the clutch disc from falling).
3. Diagonally loosen the bolts which attach the clutch cover to
flywheel.Back off bolts in succession, one or two turns at a time, to avoid bending cover flange.
NOTE: DO NOT clean the clutch disc or release bearing with cleaning solvent.
INSPECTION CLUTCH COVER ASSEMBLY
1. Check the diaphragm spring end for wear and uneven height.
2. Replace if wear is evident or height difference exceeds the limit.
Limit: 0.5 mm (0.02 in.)
3. Check the pressure plate surface for wear, cracks and color change.
CLUTCH DISC