hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

ETACS Module Input Signal Test - 1|Page 109 > < ETACS Module Input Signal Test - 1|Page 107
Page 5
background image

If the key is in the ignition and the driver's door or assist door is opened and the vehicle is locked using driver's knob or assist knob, then the
central locking system will issue an unlock pulse of 1 second duration to the all doors thus preventing locking of the vehicle. (With a knob remains
locked, if the switch in the actuator is not changed, the central locking shall issue 1 pulse of 1 seconds duration and 3 pulses of 0.5 second
duration to unlock the vehicle.)

7. POWER WINDOW TIMER

1. When the ignition is switched ON, the power window relay output is turned ON.
2. When the ignition is switched OFF, the power window output is maintained ON for 30 seconds and then turned OFF.

3. With the state of step 2, if the driver's door or assist door is opened, the output shall be turned OFF immediately.

8. DOOR OPEN WARNING

1. If the key is in the ignition key cylinder and the driver's door is opened, the chime bell sounds continually (period: 0.9 sec. Duty rate:50%).

2. If the door is closed or the key is removed, the chime stops immediately.

9. TAIL LAMP AUTO CUT

1. When the tail lamp is switched ON, if the ignition is switched OFF and the driver's door is opened, the tail lamp should be automatically OFF.
2. With the ignition switched ON, if the driver's door is opened and the ignition is switched OFF, the tail lamp should be automatically OFF.

3. When the tail lamp is cut automatically, if the tail lamp switch is turned OFF and ON, the tail lamp is illuminated and auto cut function is

cancelled.

10. OUTSIDE DOOR KEY HOLE ILLUMINATION

1. When pulling the driver's outside door handle to open the door, door key hole illumination is turned ON for 10 seconds

ETACS Module Input Signal Test - 1|Page 109 > < ETACS Module Input Signal Test - 1|Page 107