Sonata V6-2.7L (2004)
27. Install the bellows in, taking care not to twist it.
28. Fill the dust cover inner side and lip with the specified multipurpose grease, and fix the dust cover in position with the clip ring attached in the
groove of the tie rod end.
Recommended grease: Multipurpose grease J310a, NLGI grade #2 EP
29. Install the tie rods so that the length of the left and right tie rods will be equal to the standard value.
Standard value
Tie rod free length: 47.2 mm (1.86 inch)
Note: Be sure to always identify the parts by marking (L,R) in advance for correct installation.
Installation
Installation
1. When installing the mounting rubber, align the projection of the mounting rubber with the indentation in the crossmember to install the gear box.
2. Confirm that there is no oil leak.
3. Confirm that the steering wheel rotates smoothly when it is turned.
4. Adjust the toe-in.