Sonata V6-2.7L (2004)
1. Using the special tool (09517-43001), disassemble the center bearing bracket from the inner shaft.
2. Using the special tool (09216-21100, 09495-33100), press out the center bearing from the outside to the in side direction of the center bearing
bracket as shown in the illustration.
INSPECTION
1. Check the inner shaft for damage, bending or rust.
2. Check the inner shaft splines for wear or damage.
3. Check the center bearing for scores, discoloration and the roughness of the roller journals moving surfaces.
REASSEMBLY
1. Apply multipurpose grease to the center bearing and inside the center bearing bracket.
2. Using the special tool (09495-33100), press the center bearing into the center bearing bracket.
