Sonata V6-3.0L (1991)
installation faster.
8.
Re-install the 3 bolts holding the oil cooler to the radiator support.
9.
Remove the mounting bracket holding the oil return hose.
10.
Replace the oil cooler feed hose (235 mm) with the new blue marked one and the new spring clamps.
11.
Remove the oil cooler return hose from the automatic transaxle and the radiator upper tank.
12.
Install the new white marked oil return hose (525 mm) on the automatic transaxle and upper radiator tank.
13.
Re-install the mounting bracket on the white marked position on the new oil return hose (525 mm) and bolt the mounting bracket to the engine
coolant reservoir retainer.