Sonata V6-3.0L (1991)
1.
Open the hood.
2.
Remove the radiator gfille. (Review TSB # 92-80-002 May, 1992) (Grille clips may break during removal)
3.
Remove RH combination lamp and headlight assemblies.
4.
Remove the horn.
5.
Loosen the 3 clamps on the oil cooler hoses.
6.
Remove the 3 bolts holding the oil cooler and remove the 2 hoses.
7.
Install the new (90 mm) yellow marked hose.
NOTE:
Use the new type spring clamps on all hose connections.
8.
Install the (520 mm) hose with no marks, to the oil cooler using the new type spring clamp.
9.
Re-attach the oil cooler to the radiator support.
10.
Lift the car.