Sonata V6-3.0L (1991)
Transmission Cooler: Service and Repair
REMOVAL AND INSTALLATION
1. Remove the battery and air cleaner assembly.
2. Remove the turn signal light assembly headlight assembly (RH), radiator grill and front bumper assembly.
3. Disconnect the transaxle oil cooler hoses from the automatic transaxle.
4. Loosen the hose clamps and then remove the oil cooler assembly.
CAUTION:
Plug the ends of the oil cooler hoses and the automatic transaxle port to prevent the transaxle fluid from spilling out and foreign material from
getting in.
Plug the nipple at the automatic transaxle in order to prevent entrance of foreign material into the automatic transaxle.
Note: When removing each part, avoid spilling the transaxle fluid.
5. Installation is the opposite of removal.