Sonata GLS V6-2.5L (2000)
Brake Master Cylinder: Service and Repair
Removal and Installation
REMOVAL
1. Detach the brake tubes from the master cylinder, and then install the plugs.
CAUTION: Do not let brake fluid remain on a painted surface. Wash it off immediately.
2. Remove the master cylinder mounting nuts, and then lift out the master cylinder.
INSTALLATION
1. Inspect the length of output rod and adjust (8.25 ± 0.125 mm).
2. Install the master cylinder on the brake booster.
3. Connect the brake tubes to the master cylinder.
4. Fill brake reservoir with brake fluid and bleed the system.