Sonata GLS V6-2.5L (2000)
Engine Oil: Testing and Inspection
CHECKING ENGINE OIL
1. Position a vehicle on a level surface.
2. Stop the engine.
NOTE:
In the case of a vehicle that has been out of service for a prolonged period, run the engine for several minutes.
Stop the engine and wait for 5 minutes at least, then check the oil level.
3. Check that the engine oil level is within the level range indicated on the oil dipstick. If the oil level is found to have fallen to the lower limit (the
MIN mark), refill to the "MAX" mark.
NOTE: When refilling, use the same type of engine oil as the one currently being used.
4. Check that the oil is not dirty or mixed with coolant or gasoline, and that it has the proper viscosity.
SELECTION OF ENGINE OIL
Recommended API classification: SD OR ABOVE
SE OR ABOVE [For EC.]
Recommended SAE viscosity grades:
*1. Restricted by driving and climate condition.
*2. Not recommended for sustained high speed vehicle operation.
NOTE: For best performance and for maximum protection for all types of operation, select only those lubricants which:
