Sonata GLS V6-2.5L (2000)
Multi Function Switch: Service and Repair
Multifunction Switch Components
MULTIFUNCTION SWITCH COMPONENTS
CAUTION: Prior to removing of the multifunction switch assembly in vehicles equipped with air bags, be careful to keep the following items.
-
Never attempt to disassemble or repair the air bag module or clock spring. If faulty, replace it.
-
Do not drop the air bag module or clock spring or allow contact with water, grease or oil. Replace if a dent, crack, deformation or rust are
detected.
-
The air bag module should be stored on a flat surface and placed so that the pad surface is facing upward. Do not place anything on top of it.
-
Do not expose the air bag module to temperatures over 93 °C (200 °F).
-
After deployment of an air bag, replace the clock spring with a new one.
-
Wear gloves and safety glasses when handling an air bag that has already been deployed.
-
An undeployed air bag module should only be disposed of in accordance with the procedures mentioned in the restraints section.
-
When you disconnect the air bag module-clock spring connector, take care not to apply excessive force to it.
-
The removed air bag module should be stored in a clean, dry place.