Sonata GLS V6-2.5L (2000)
7. Glue the rubber dam to the inside surface of the rear window glass around the entire edge as shown, to contain the sealant during installation.
8. Install the molding around the edge of the rear window as shown.
9. Apply the light coat of body primer to the original sealant remaining around the body flange. The glass should be installed 10 minutes after you
apply the primer.
10. Pack adhesive into the cartridge without air packets, to ensure continuous application. Put the cartridge in a caulking gun or Sealant Gun, and run a
bead of adhesive around the edge of the glass as shown.
NOTE: Apply the adhesive within 5 minutes after applying the glass primer.
