Sonata GLS V6-2.7L (2002)
DISASSEMBLY
NOTE:
-
Do not disassemble the tripod assembly.
-
The driveshaft joint requires special grease. Do not substitute with another type of grease.
-
The boot clamp should be replaced with a new one.
-
The boot should be replaced with a new one.
1. Using a side cutter, cut the G.I. and A.C. big clamps and remove them.
2. Using a brass bar and hammer, remove the G.I. and A.C. small clamps.
3. Place a match marks on the tripod and tulip.
NOTE: Do not punch the mark.