Tiburon L4-1.8L (1997)
Vacuum Brake Booster: Service and Repair
REMOVAL
1. Disconnect the brake lines from the master cylinder.
2. Remove the master cylinder. See: Hydraulic System/Brake Master Cylinder/Service and Repair
CAUTION:Do not allow brake fluid to remain on a painted surface. Wash it off immediately.
3. Disconnect the vacuum hose from the booster.
4. Remove the operating rod from the brake pedal.
5. Remove the stop lamp switch.
6. Loosen the booster mounting nuts.
7. Lift out the booster assembly.