Tiburon L4-1.8L (1997)
6. Install the timing belt cover, tighten timing belt cover bolts to 8-10 Nm (80-100 kg.cm, 6-7.4 ft. lbs.)
10. Install the crankshaft pulley.
CAUTION: Make sure that the crankshaft sprocket pin fits the small hole in the pulley.
7. Tighten crankshaft pulley bolt to 170-180 Nm (1700-1800 kg.cm, 125-133 ft. lbs.)
8. Install the coolant pump pulley.
8. Install the drive belt and adjust the belt tension.
10. Install the cylinder head cover, then tighten bolts to 8-10 Nm (80-100 kg. cm, 6-7 ft. lbs.)
11. Install the spark plug cables, ignition coil assembly and cylinder head center cover.