Tiburon L4-1.8L (1997)
HARNESS INSPECTION PROCEDURES
DTC P0102, P0123 - Mass Air Flow Sensor
TROUBLESHOOTING PROCEDURES
HINTS:
1. If the engine stalls occasionally, start the engine and shake the MAF sensor harness. If the engine stalls, check for poor contact at the MAF sensor
connector.
2. If the MAF sensor output voltage is other than O when the ignition switch is turned on (do not start the engine). Check for the faulty MAF sensor
or ECM.
3. If the engine can be idle even if the MAF sensor output voltage is out of specification, check for the following conditions;
-
Disturbed air flow in the MAF sensor, disconnected air duct and clogged air cleaner filter.
-
Poor combustion in the cylinder, faulty ignition plug, ignition coil, injector and incorrect comparison.
4. Though no MAF sensor malfunction occurs, check the mounting direction of MAF sensor.