Tiburon L4-2.0L (1999)
Alignment: Service and Repair
Rear Wheel Alignment
TOE-IN
Standard value:
4 mm +3/-1 (0.16 inch +0.12/-0.04)
NOTE: The rear suspension (T) mounting bolt should be turned an equal amount on both sides when adjusting. Loosen the rear-side nut prior to
adjusting the eccentric bolt.
Left wheel: Clockwise direction: toe-in
Right wheel: Clockwise direction: toe-out
The scale has gradations of approximately 2.4 mm (0.09 inch) (signal side to angle equivalent to 14')
CAUTION: The eccentric bolt should be adjusted within a 90° range left and right from the center position.