Tiburon L4-2.0L (1999)
10. Disconnect the clamp holding the return tube & hose assembly (C) and the oil cooler tube.
11. Remove the return tube & hose assembly (C).
12. Installation is the reverse order of removal.
NOTE:
-
Install the return tube and hose assembly so that it is not twisted and it does not come in contact with any other parts.
-
After installation, bleed the system.
OIL COOLER TUBE
1. Remove the front bumper and rail assembly.
2. Disconnect the connection of the oil cooler tube to the return tube.
3. Disconnect the connection of the coil cooler tube to the return hose of the fluid reservoir.
4. Remove the oil cooler tube mounting bracket.
5. Remove the oil cooler tube and bracket.
