Tiburon V6-2.7L (2004)
6.
Remove the power window switch from the interior door trim panel by disengaging the upper and lower clips.
7.
Re-connect the power window switch to the door wire harness. This will allow you to roll the window up and down.
8.
Carefully pull back the upper left and right corner white door plastic vapor barrier to gain access to the side glass stop nuts (B).
NOTE:
This is where the adjustments will be made.
9.
Carefully pull back the upper left and right corner white door plastic vapor barrier to gain access to the side glass stop nuts (B).
NOTE:
This is where the adjustments will be made.